Versions Compared

Old Version 16

changes.mady.by.user Jason Alderfer

Saved on

compared with

New Version 17

changes.mady.by.user Jason Alderfer

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

If you have a computer, tablet, phone, or similar device

  1. Connect to the wireless network EMU-Guest (your device should do this automatically).

  2. Try to browse to any web site.  Your device will display the following page. (Your device may do this automatically). 

  3. Click Student and Employee Access.

  4. This will load the page you see now.  Follow the instructions below for your type of device.  Scroll to the bottom for instructions on connecting gaming consoles and TVs, or if you have a computer you want to connect to the network port in your room or office.


Expand
title<b>If If you have an Android device</b>device
  1. Select EMU WiFi
  2. EAP method should be changed to PEAP, if it isn't already


  3. Phase 2 authentication needs to be changed to MSCHAPV2


  4. CA certificate should be "Use system certificates" if it is an option (it is more secure), otherwise use "(Unspecified)" or "Do not validate"


  5. If "Use system certificates" is selected, the domain needs to be set to: "dad.emu.edu", and the identity is your username.

...

  1. First connect your computer or phone.  You need to have this device connected first.

  2. Now you need to find the MAC address of your device.  If you don't know how to find this, try Googling "MAC address" and the name of your device. The MAC address may also be referred to as Hardware Address, Physical Address, Ethernet Address, or Wired Address.  It will be a 12 digit combination of numbers and letters such as 00:3c:ec:29:9a:44 or 00-f0-cc-90-15-aa.

  3. There may be more than one MAC address depending on whether the device is capable of both wired and wireless access.  Choose the MAC address for the type of connectivity you wish to use.

  4. Once you have the MAC address, you need to log in to the registration page at https://appsrv3.emu.edu/is/register-device/ and enter the MAC address.  Please be aware that you will be held responsible for all activity on this device.  If the device is used in a way that violates EMU policies, even if by someone else without your permission, it is still your responsibility.

  5. After the MAC address of your device is registered, you can gain network access through it in two ways:
    1. By obtaining the key for the wireless SSID EMU-iot.  The key will change at the beginning of every semester and is available when you log into my.emu.edu.
    2. By plugging it into the ethernet port in your room.  Most residence hall rooms have three network ports on the wall.  The live one is usually the left port of the double port module. If more than one live port is needed, contact the Helpdesk.

...