Versions Compared

Old Version 30

changes.mady.by.user Jenni Piper

Saved on

compared with

New Version 31

changes.mady.by.user David Layman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

If you have a computer, tablet, phone, or similar device

...

If you have an EMU account (Royals username and password) please see below for device specific instructions on how to connect to the EMU wireless network

...

.

...

If your computer does not have a wifi adapter, students may get one for free from the IS Helpdesk.

...

Try to browse to any web site.  Your device will display the following page. (Your device may do this automatically). 

...

Click Student and Employee Access.

...

This will load the page you see now.  Follow the instructions below for your type of device.  Scroll to the bottom for instructions on connecting gaming consoles and TVs, or if you have a computer you want to connect to the network port in your room or office.

...

titleIf you have an Android device

...

Select EMU WiFi

EAP method should be changed to PEAP, if it isn't already

...

Phase 2 authentication needs to be changed to MSCHAPV2

...


Expand
titleIf you have an Android device

  1. Open Settings and then Wifi settings.

  2. Select the “EMU” network.

  3. A new window will come up where you can configure the connection.  Below are the items that need to be configured.

    1. EAP method:  Needs to be set to PEAP

    2. Phase 2 authentication: Needs to be set to MSCHAPV2

    3. CA certificate: Select "Use system certificates", otherwise use "Unspecified" or "Do not validate"


    Image RemovedImage Removed

    1. . If "Use system certificates" is selected, the domain needs to be set to: "dad.emu.edu"

    , and the identity is your username.
    Image Removed

    1. .

    2. Identity: Enter your EMU username (Not email).

    3. Password: Enter your EMU password.

  4. Select Connect at the bottom of the screen to continue.

  5. Once the word “Connected” appears underneath the EMU wireless network you will be able to use EMU wireless.


Expand
titleIf you have a Chromebook

  1. Open the settings window by moving the mouse down to the lower right side of the screen and click on the time.

  2. In the popup window look for the wifi section in the upper left corner of the popup window and click on the words “Not Connected” underneath the wifi icon.

  3. The popup window will update and show a list of available networks.

  4. Select EMU WiFithe EMU network by clicking on it.

  5. A new window will come up where you can configure the connection.  Below are the items that need to be configured.

    1. EAP method

    should be changed

    1. :  Needs to be set to PEAP

    2. Phase 2 authentication

    needs

    1. : Needs to be

    changed

    1. set to MSCHAPV2

    2. CA certificate

    should be Default, or Do not validate if Default is not an option
    Image Removed

    1. : Select "Use system certificates", otherwise use "Unspecified" or "Do not validate". If "Use system certificates" is selected, the domain needs to be set to: "dad.emu.edu".

    2. Identity: Enter your EMU username (Not email).

    3. Password: Enter your EMU password.

  6. Select Connect at the bottom of the screen to continue.

  7. Once the word “Connected” appears underneath the EMU wireless network you will be able to use EMU wireless.


Expand
titleIf you have an Apple mobile device (iPhone, iPad, etc.)

  1. Open Settings -> Wifi and select EMU wireless network

  2. A window will open where you can enter your login information.

    1. Username: Enter your EMU username (Not email).

  1. Select EMU WiFi

  2. Sign in with your credentials

  3. Trust the certificate

Image Removed

    1. Password: Enter your EMU password.

  2. Click on Join in the upper right corner

  3. A window will open showing a certificate.  Please click Trust in the upper right corner and the window will close taking you back to the main Wifi screen.

  4. There will be a progress wheel beside the EMU network that should be replaced with a blue check mark once connected.


Expand
titleIf you have an Apple computer (laptop, desktop)

  1. First, navigate Navigate to the " WiFi " symbol, , at the top of the screen and click on it. Then look for "EMU" on .

  2. Click on the Wifi symbol,, to show a drop down list of wireless networks available. Select “EMU" from the list of available networks.

    Image Removed

  3. When you click on it, a A window will pop up asking you to authenticate to the server. Do so with your EMU username and password.

    Image Removed

    A new window will pop up asking you to verify the network certificate. It is safe, and necessary to do so.

    Image Removed

    Once you hit "Continue", the computer will prompt you to sign in to update settings. Do so.

    Image Removed

    You should now be connected to the WiFiopen where you can enter your login information.

    1. Username: Enter your EMU username (Not email).

    2. Password: Enter your EMU password.

  4. Once you have entered your login information please click the OK button to continue.

  5. A window will open asking to Verify Certificate for dad.emu.edu. To continue please click on the Continue button. NOTE: you might be prompted to enter your Mac username and password to update settings on your computer.

  6. After a few moments your mac should be connected to the EMU wireless network.


Expand
titleIf you have a Windows 10/ device

  1. First, navigate Navigate to the " WiFi symbol" , , in the lower left right hand side of the screen close to near the date and time.

  2. Then, click on it, select "EMU", and then click connect.

    Image Removed

    Type Click on the Wifi symbol, , to show a list of wireless networks available.  Select "EMU" from the list of available networks and make sure the “Connect automatically” checkbox is checked, then click on the Connect button.

  3. Enter your username and password in the space provided, and hit "Ok"

    Image Removed

    click on the OK button.

    1. Username: Enter your EMU username (Not email).

    2. Password: Enter your EMU password.

  4. You should be prompted to verify that you trust this network.  To continue connecting click on the Connect button. 

  5. After a few moments your PC should be connected to the EMU wireless network, hit 

    Image Removed


Guest Network

If you are a campus guest and need short term access to wifi please follow the steps below. Please note that standard guest accounts expired 7 days from creation.

  1. Connect to the wireless network EMU-Guest (In most cases this involves just clicking on the EMU-Guest network name in your device wifi settings).

  2. Next open your preferred web browser. You should be greeted by a page that looks similar to the image below (Your device may do this automatically).  If you do not see anything try navigating to any web page. You should automatically be redirected. If you cannot get to a page that looks like the image below please contact the helpdesk.

    Image Added

  3. Click Open Guest Access and you will be show a login page.

  4. A new page will open and ask for your First and Last Name, Mobile Phone Number and Email Address. Once you have entered the required information click on the blue Register button at the bottom. You will be emailed your login information.

  5. Once you have your guest username and password use the instructions above to connect your device to the EMU wireless network.

If you have a smart TV, gaming device, Roku, or other similar device

  1. First connect your computer or phone.  You need to have this device connected first.

  2. Now you need to find the MAC address of your device.  If you don't know how to find this, try Googling "MAC address" and the name of your device. The MAC address may also be referred to as Hardware Address, Physical Address, Ethernet Address, or Wired Address.  It will be a 12 digit combination of numbers and letters such as 00:3c:ec:29:9a:44 or 00-f0-cc-90-15-aa.

  3. There may be more than one MAC address depending on whether the device is capable of both wired and wireless access.  Choose the MAC address for the type of connectivity you wish to use.

  4. Once you have the MAC address, you need to log in to the registration page at https://appsrv3.emu.edu/is/register-device/ and enter the MAC address.  Please be aware that you will be held responsible for all activity on this device.  If the device is used in a way that violates EMU policies, even if by someone else without your permission, it is still your responsibility.

  5. After the MAC address of your device is registered, you can gain network access through it in two ways:

    1. By obtaining the key for the wireless SSID EMU-iot.  The key will change at the beginning of every semester and is available when you log into my.emu.edu.

    2. By plugging it into the ethernet port in your room.  Most residence hall rooms have three network ports on the wall.  The live one is usually the left port of the double port module. If more than one live port is needed, contact the Helpdesk.

...